STUNNEL(8)                          stunnel                         STUNNEL(8)

       stunnel - universal SSL tunnel

       stunnel [filename] | -help | -version | -sockets

       The stunnel program is designed to work as SSL encryption wrapper
       between remote clients and local (inetd-startable) or remote servers.
       The concept is that having non-SSL aware daemons running on your system
       you can easily set them up to communicate with clients over secure SSL

       stunnel can be used to add SSL functionality to commonly used Inetd
       daemons like POP-2, POP-3, and IMAP servers, to standalone daemons like
       NNTP, SMTP and HTTP, and in tunneling PPP over network sockets without
       changes to the source code.

       This product includes cryptographic software written by Eric Young

           Use specified configuration file

           Print stunnel help menu

           Print stunnel version and compile time defaults

           Print default socket options

       -install (NT/2000/XP only)
           Install NT Service

       -uninstall (NT/2000/XP only)
           Uninstall NT Service

       Each line of the configuration file can be either:

       o   an empty line (ignored)

       o   a comment starting with "#" (ignored)

       o   an "option_name = option_value" pair

       o   "[service_name]" indicating a start of a service definition


       CApath = directory
           Certificate Authority directory

           This is the directory in which stunnel will look for certificates
           when using the verify. Note that the certificates in this directory
           should be named XXXXXXXX.0 where XXXXXXXX is the hash value of the

       CAfile = certfile
           Certificate Authority file

           This file contains multiple CA certificates, used with the verify.

       cert = pemfile
           certificate chain PEM file name

           A PEM is always needed in server mode.  Specifying this flag in
           client mode will use this certificate chain as a client side cer-
           tificate chain.  Using client side certs is optional.  The certifi-
           cates must be in PEM format and must be sorted starting with the
           certificate to the highest level (root CA).

       chroot = directory (Unix only)
           directory to chroot stunnel process

           chroot keeps stunnel in chrooted jail.  CApath, pid and exec are
           located inside the jail and the patches have to be relative to the
           directory specified with chroot.

           To have libwrap (TCP Wrappers) control effective in a chrooted
           environment you also have to copy its configuration files
           (/etc/hosts.allow and /etc/hosts.deny) there.

       ciphers = cipherlist
           Select permitted SSL ciphers

           A colon delimited list of the ciphers to allow in the SSL connec-
           tion.  For example DES-CBC3-SHA:IDEA-CBC-MD5

       client = yes | no
           client mode (remote service uses SSL)

           default: no (server mode)

       debug = [facility.]level
           debugging level

           Level is a one of the syslog level names or numbers emerg (0),
           alert (1), crit (2), err (3), warning (4), notice (5), info (6), or
           debug (7).  All logs for the specified level and all levels numeri-
           cally less than it will be shown.  Use debug = debug or debug = 7
           for greatest debugging output.  The default is notice (5).

           The syslog facility 'authpriv' will be used unless a facility name
           is supplied.  (Facilities are not supported on Win32.)

           Case is ignored for both facilities and levels.

       EGD = egd path (Unix only)
           path to Entropy Gathering Daemon socket

           Entropy Gathering Daemon socket to use to feed OpenSSL random num-
           ber generator.  (Available only if compiled with OpenSSL 0.9.5a or

       foreground = yes | no (Unix only)
           foreground mode

           Stay in foreground (don't fork) and log to stderr instead of via
           syslog (unless output is specified).

           default: background in daemon mode

       key = keyfile
           private key for certificate specified with cert option

           Private key is needed to authenticate certificate owner.  Since
           this file should be kept secret it should only be readable to its
           owner.  On Unix systems you can use the following command:

               chmod 600 keyfile

           default: value of cert option

       options = SSL_options
           OpenSSL library options

           The parameter is the OpenSSL option name as described in the
           SSL_CTX_set_options(3ssl) manual, but without SSL_OP_ prefix.  Sev-
           eral options can be used to specify multiple options.

           For example for compatibility with erroneous Eudora SSL implementa-
           tion the following option can be used:

               options = DONT_INSERT_EMPTY_FRAGMENTS

       output = file
           append log messages to a file instead of using syslog

       pid = file (Unix only)
           pid file location

           If the argument is empty, then no pid file will be created.

       RNDbytes = bytes
           bytes to read from random seed files

           Number of bytes of data read from random seed files.  With SSL ver-
           sions less than 0.9.5a, also determines how many bytes of data are
           considered sufficient to seed the PRNG.  More recent OpenSSL ver-
           sions have a builtin function to determine when sufficient random-
           ness is available.

       RNDfile = file
           path to file with random seed data

           The SSL library will use data from this file first to seed the ran-
           dom number generator.

       RNDoverwrite = yes | no
           overwrite the random seed files with new random data

           default: yes

       service = servicename
           use specified string as the service name

           On Unix: inetd mode service name for TCP Wrapper library.

           On NT/2000/XP: NT service name in the Control Panel.

           default: stunnel

       session = timeout
           session cache timeout

       setgid = groupname (Unix only)
           setgid() to groupname in daemon mode and clears all other groups

       setuid = username (Unix only)
           setuid() to username in daemon mode

       socket = a|l|r:option=value[:value]
           Set an option on accept/local/remote socket

           The values for linger option are l_onof:l_linger.  The values for
           time are tv_sec:tv_usec.


               socket = l:SO_LINGER=1:60
                   set one minute timeout for closing local socket
               socket = r:TCP_NODELAY=1
                   turn off the Nagle algorithm for remote sockets
               socket = r:SO_OOBINLINE=1
                   place out-of-band data directly into the
                   receive data stream for remote sockets
               socket = a:SO_REUSEADDR=0
                   disable address reuse (enabled by default)
               socket = a:SO_BINDTODEVICE=lo
                   only accept connections on loopback interface

       verify = level
           verify peer certificate

               level 1 - verify peer certificate if present
               level 2 - verify peer certificate
               level 3 - verify peer with locally installed certificate
               default - no verify


       Each configuration section begins with service name in square brackets.
       The service name is used for libwrap (TCP Wrappers) access control and
       lets you distinguish stunnel services in your log files.

       Note that if you wish to run stunnel in inetd mode (where it is pro-
       vided a network socket by a server such as inetd, xinetd, or tcpserver)
       then you should read the section entitiled INETD MODE below.

       accept = [host:]port
           accept connections on specified host:port

           If no host specified, defaults to all IP addresses for the local

       connect = [host:]port
           connect to remote host:port

           If no host specified, defaults to localhost.

       delay = yes | no
           delay DNS lookup for 'connect' option

       exec = executable_path (Unix only)
           execute local inetd-type program

       execargs = $0 $1 $2 ... (Unix only)
           arguments for exec including program name ($0)

           Quoting is currently not supported.  Arguments are speparated with
           arbitrary number of whitespaces.

       ident = username
           use IDENT (RFC 1413) username checking

       local = host
           IP of the outgoing interface is used as source for remote connec-
           tions.  Use this option to bind a static local IP address, instead.

       protocol = proto
           Negotiate SSL with specified protocol

           currently supported: smtp, pop3, nntp

       pty = yes | no (Unix only)
           allocate pseudo terminal for 'exec' option

       TIMEOUTbusy = seconds
           time to wait for expected data

       TIMEOUTclose = seconds
           time to wait for close_notify (set to 0 for buggy MSIE)

       TIMEOUTidle = seconds
           time to keep an idle connection

       transparent = yes | no (Unix only)
           transparent proxy mode

           Re-write address to appear as if wrapped daemon is connecting from
           the SSL client machine instead of the machine running stunnel.
           This option is only available in local mode (exec option) by
           LD_PRELOADing shared library or in remote mode (connect
           option) on Linux 2.2 kernel compiled with transparent proxy option
           and then only in server mode. Note that this option will not com-
           bine with proxy mode (connect) unless the client's default route to
           the target machine lies through the host running stunnel, which
           cannot be localhost.

       stunnel returns zero on success, non-zero on error.

       In order to provide SSL encapsulation to your local imapd service, use

           accept = 993
           exec = /usr/sbin/imapd
           execargs = imapd

       If you want to provide tunneling to your pppd daemon on port 2020, use
       something like

           accept = 2020
           exec = /usr/sbin/pppd
           execargs = pppd local
           pty = yes

       If you want to use stunnel in inetd mode to launch your imapd process,
       you'd use this stunnel.conf.  Note there must be no [service_name] sec-

           exec = /usr/sbin/imapd
           execargs = imapd

           stunnel configuration file

           stunnel certificate and private key

       Option execargs does not support quoting.

       stunnel cannot be used for the FTP daemon because of the nature of the
       FTP protocol which utilizes multiple ports for data transfers.  There
       are available SSL enabled versions of FTP and telnet daemons, however.


       The most common use of stunnel is to listen on a network port and
       establish communication with either a new port via the connect option,
       or a new program via the exec option.  However there is a special case
       when you wish to have some other program accept incoming connections
       and launch stunnel, for example with inetd, xinetd, or tcpserver.

       For example, if you have the following line in inetd.conf:

           imaps stream tcp nowait root /usr/sbin/stunnel stunnel /etc/stunnel/imaps.conf

       In these cases, the inetd-style program is responsible for binding a
       network socket (imaps above) and handing it to stunnel when a connec-
       tion is received.  Thus you do not want stunnel to have any accept
       option.  All the Service Level Options should be placed in the global
       options section, and no [service_name] section will be present.  See
       the EXAMPLES section for example configurations.


       Each SSL enabled daemon needs to present a valid X.509 certificate to
       the peer. It also needs a private key to decrypt the incoming data. The
       easiest way to obtain a certificate and a key is to generate them with
       the free OpenSSL package. You can find more information on certificates
       generation on pages listed below.

       Two things are important when generating certificate-key pairs for
       stunnel. The private key cannot be encrypted, because the server has no
       way to obtain the password from the user. To produce an unencrypted key
       add the -nodes option when running the req command from the OpenSSL

       The order of contents of the .pem file is also important.  It should
       contain the unencrypted private key first, then a signed certificate
       (not certificate request).  There should be also empty lines after cer-
       tificate and private key.  Plaintext certificate information appended
       on the top of generated certificate should be discarded. So the file
       should look like this:

           -----BEGIN RSA PRIVATE KEY-----
           [encoded key]
           -----END RSA PRIVATE KEY-----
           [empty line]
           -----BEGIN CERTIFICATE-----
           [encoded certificate]
           -----END CERTIFICATE-----
           [empty line]


       stunnel needs to seed the PRNG (pseudo random number generator) in
       order for SSL to use good randomness.  The following sources are loaded
       in order until sufficient random data has been gathered:

       o   The file specified with the RNDfile flag.

       o   The file specified by the RANDFILE environment variable, if set.

       o   The file .rnd in your home directory, if RANDFILE not set.

       o   The file specified with '--with-random' at compile time.

       o   The contents of the screen if running on Windows.

       o   The egd socket specified with the EGD flag.

       o   The egd socket specified with '--with-egd-sock' at compile time.

       o   The /dev/urandom device.

       With recent (>=OpenSSL 0.9.5a) version of SSL it will stop loading ran-
       dom data automatically when sufficient entropy has been gathered.  With
       previous versions it will continue to gather from all the above sources
       since no SSL function exists to tell when enough data is available.

       Note that on Windows machines that do not have console user interaction
       (mouse movements, creating windows, etc) the screen contents are not
       variable enough to be sufficient, and you should provide a random file
       for use with the RNDfile flag.

       Note that the file specified with the RNDfile flag should contain ran-
       dom data -- that means it should contain different information each
       time stunnel is run.  This is handled automatically unless the RNDover-
       write flag is used.  If you wish to update this file manually, the
       openssl rand command in recent versions of OpenSSL, would be useful.

       One important note -- if /dev/urandom is available, OpenSSL has a habit
       of seeding the PRNG with it even when checking the random state, so on
       systems with /dev/urandom you're likely to use it even though it's
       listed at the very bottom of the list above.  This isn't stunnel's
       behaviour, it's OpenSSLs.

           access control facility for internet services

           internet ``super-server''
           stunnel homepage
           stunnel Frequently Asked Questions
           OpenSSL project website

       Michal Trojnara

3rd Berkeley Distribution         2002.12.26                        STUNNEL(8)