ABCDEFGHIJKLMNOPQRSTUVWXYZ

as

AS(1)                        GNU Development Tools                       AS(1)



NAME
       AS - the portable GNU assembler.

SYNOPSIS
       as [-a[cdhlns][=file]] [-D] [--defsym sym=val]
        [-f] [--gstabs] [--gdwarf2] [--help] [-I dir]
        [-J] [-K] [-L]
        [--listing-lhs-width=NUM] [--listing-lhs-width2=NUM]
        [--listing-rhs-width=NUM] [--listing-cont-lines=NUM]
        [--keep-locals] [-o objfile] [-R] [--statistics] [-v]
        [-version] [--version] [-W] [--warn] [--fatal-warnings]
        [-w] [-x] [-Z] [--target-help] [target-options]
        [--|files ...]

       Target Alpha options:
          [-mcpu]
          [-mdebug | -no-mdebug]
          [-relax] [-g] [-Gsize]
          [-F] [-32addr]

       Target ARC options:
          [-marc[5|6|7|8]]
          [-EB|-EL]

       Target ARM options:
          [-mcpu=processor[+extension...]]
          [-march=architecture[+extension...]]
          [-mfpu=floating-point-fromat]
          [-mthumb]
          [-EB|-EL]
          [-mapcs-32|-mapcs-26|-mapcs-float|
           -mapcs-reentrant]
          [-mthumb-interwork] [-moabi] [-k]

       Target CRIS options:
          [--underscore | --no-underscore]
          [--pic] [-N]
          [--emulation=criself | --emulation=crisaout]

       Target D10V options:
          [-O]

       Target D30V options:
          [-O|-n|-N]

       Target i386 options:
          [--32|--64]

       Target i960 options:
          [-ACA|-ACA_A|-ACB|-ACC|-AKA|-AKB|
           -AKC|-AMC]
          [-b] [-no-relax]

       Target IP2K options:
          [-mip2022|-mip2022ext]

       Target M32R options:
          [--m32rx|--[no-]warn-explicit-parallel-conflicts|
          --W[n]p]

       Target M680X0 options:
          [-l] [-m68000|-m68010|-m68020|...]

       Target M68HC11 options:
          [-m68hc11|-m68hc12|-m68hcs12]
          [-mshort|-mlong]
          [-mshort-double|-mlong-double]
          [--force-long-branchs] [--short-branchs]
          [--strict-direct-mode] [--print-insn-syntax]
          [--print-opcodes] [--generate-example]

       Target MCORE options:
          [-jsri2bsr] [-sifilter] [-relax]
          [-mcpu=[210|340]]

       Target MIPS options:
          [-nocpp] [-EL] [-EB] [-n] [-O[optimization level]]
          [-g[debug level]] [-G num] [-KPIC] [-call_shared]
          [-non_shared] [-xgot] [--membedded-pic]
          [-mabi=ABI] [-32] [-n32] [-64] [-mfp32] [-mgp32]
          [-march=CPU] [-mtune=CPU] [-mips1] [-mips2]
          [-mips3] [-mips4] [-mips5] [-mips32] [-mips32r2]
          [-mips64]
          [-construct-floats] [-no-construct-floats]
          [-trap] [-no-break] [-break] [-no-trap]
          [-mfix7000] [-mno-fix7000]
          [-mips16] [-no-mips16]
          [-mips3d] [-no-mips3d]
          [-mdmx] [-no-mdmx]
          [-mdebug] [-no-mdebug]

       Target MMIX options:
          [--fixed-special-register-names] [--globalize-symbols]
          [--gnu-syntax] [--relax] [--no-predefined-symbols]
          [--no-expand] [--no-merge-gregs] [-x]
          [--linker-allocated-gregs]

       Target PDP11 options:
          [-mpic|-mno-pic] [-mall] [-mno-extensions]
          [-mextension|-mno-extension]
          [-mcpu] [-mmachine]

       Target picoJava options:
          [-mb|-me]

       Target PowerPC options:
          [-mpwrx|-mpwr2|-mpwr|-m601|-mppc|-mppc32|-m603|-m604|
           -m403|-m405|-mppc64|-m620|-mppc64bridge|-mbooke|
           -mbooke32|-mbooke64]
          [-mcom|-many|-maltivec] [-memb]
          [-mregnames|-mno-regnames]
          [-mrelocatable|-mrelocatable-lib]
          [-mlittle|-mlittle-endian|-mbig|-mbig-endian]
          [-msolaris|-mno-solaris]

       Target SPARC options:
          [-Av6|-Av7|-Av8|-Asparclet|-Asparclite
           -Av8plus|-Av8plusa|-Av9|-Av9a]
          [-xarch=v8plus|-xarch=v8plusa] [-bump]
          [-32|-64]

DESCRIPTION
       GNU as is really a family of assemblers.  If you use (or have used) the
       GNU assembler on one architecture, you should  find  a  fairly  similar
       environment  when you use it on another architecture.  Each version has
       much in common with the others, including  object  file  formats,  most
       assembler directives (often called pseudo-ops) and assembler syntax.

       as  is  primarily intended to assemble the output of the GNU C compiler
       for use by the linker .  Nevertheless, we've tried to make as  assemble
       correctly  everything  that other assemblers for the same machine would
       assemble.  Any exceptions are documented explicitly.  This doesn't mean
       as always uses the same syntax as another assembler for the same archi-
       tecture; for example, we know of several incompatible versions of 680x0
       assembly language syntax.

       Each  time  you  run  as  it assembles exactly one source program.  The
       source program is made up of one or more files.  (The standard input is
       also a file.)

       You give as a command line that has zero or more input file names.  The
       input files are read (from left file name to right).   A  command  line
       argument  (in  any position) that has no special meaning is taken to be
       an input file name.

       If you give as no file names it attempts to read one  input  file  from
       the  as  standard input, which is normally your terminal.  You may have
       to type ctl-D to tell as there is no more program to assemble.

       Use -- if you need to explicitly name the standard input file  in  your
       command line.

       If the source is empty, as produces a small, empty object file.

       as  may  write  warnings  and error messages to the standard error file
       (usually your terminal).  This should not happen when  a compiler  runs
       as  automatically.  Warnings report an assumption made so that as could
       keep assembling a flawed program; errors report a  grave  problem  that
       stops the assembly.

       If  you are invoking as via the GNU C compiler (version 2), you can use
       the -Wa option to pass arguments through to the assembler.  The  assem-
       bler  arguments must be separated from each other (and the -Wa) by com-
       mas.  For example:

               gcc -c -g -O -Wa,-alh,-L file.c

       This passes two options to the assembler: -alh (emit a listing to stan-
       dard  output  with high-level and assembly source) and -L (retain local
       symbols in the symbol table).

       Usually you do not need to use this -Wa mechanism, since many  compiler
       command-line  options  are automatically passed to the assembler by the
       compiler.  (You can call the GNU compiler driver with the -v option  to
       see  precisely what options it passes to each compilation pass, includ-
       ing the assembler.)

OPTIONS
       -a[cdhlmns]
           Turn on listings, in any of a variety of ways:

           -ac omit false conditionals

           -ad omit debugging directives

           -ah include high-level source

           -al include assembly

           -am include macro expansions

           -an omit forms processing

           -as include symbols

           =file
               set the name of the listing file

           You may combine these options; for example, use -aln  for  assembly
           listing  without forms processing.  The =file option, if used, must
           be the last one.  By itself, -a defaults to -ahls.

       -D  Ignored.  This option is accepted  for  script  compatibility  with
           calls to other assemblers.

       --defsym sym=value
           Define the symbol sym to be value before assembling the input file.
           value must be an integer constant.  As in C, a leading 0x indicates
           a hexadecimal value, and a leading 0 indicates an octal value.

       -f  ``fast''---skip whitespace and comment preprocessing (assume source
           is compiler output).

       --gstabs
           Generate stabs debugging information for each assembler line.  This
           may help debugging assembler code, if the debugger can handle it.

       --gdwarf2
           Generate  DWARF2  debugging  information  for  each assembler line.
           This may help debugging assembler code, if the debugger can  handle
           it.   Note - this option is only supported by some targets, not all
           of them.

       --help
           Print a summary of the command line options and exit.

       --target-help
           Print a summary of all target specific options and exit.

       -I dir
           Add directory dir to the search list for ".include" directives.

       -J  Don't warn about signed overflow.

       -K  This option is accepted but has no effect on the TARGET family.

       -L
       --keep-locals
           Keep (in the symbol table) local  symbols.   On  traditional  a.out
           systems  these  start  with L, but different systems have different
           local label prefixes.

       --listing-lhs-width=number
           Set the maximum width, in words, of the output data column  for  an
           assembler listing to number.

       --listing-lhs-width2=number
           Set the maximum width, in words, of the output data column for con-
           tinuation lines in an assembler listing to number.

       --listing-rhs-width=number
           Set the maximum width of an input source line, as  displayed  in  a
           listing, to number bytes.

       --listing-cont-lines=number
           Set  the  maximum number of lines printed in a listing for a single
           line of input to number + 1.

       -o objfile
           Name the object-file output from as objfile.

       -R  Fold the data section into the text section.

       --statistics
           Print the maximum space (in bytes) and total time (in seconds) used
           by assembly.

       --strip-local-absolute
           Remove local absolute symbols from the outgoing symbol table.

       -v
       -version
           Print the as version.

       --version
           Print the as version and exit.

       -W
       --no-warn
           Suppress warning messages.

       --fatal-warnings
           Treat warnings as errors.

       --warn
           Don't suppress warning messages or treat them as errors.

       -w  Ignored.

       -x  Ignored.

       -Z  Generate an object file even after errors.

       -- | files ...
           Standard input, or source files to assemble.

       The  following  options  are available when as is configured for an ARC
       processor.

       -marc[5|6|7|8]
           This option selects the core processor variant.

       -EB | -EL
           Select either big-endian (-EB) or little-endian (-EL) output.

       The following options are available when as is configured for  the  ARM
       processor family.

       -mcpu=processor[+extension...]
           Specify which ARM processor variant is the target.

       -march=architecture[+extension...]
           Specify which ARM architecture variant is used by the target.

       -mfpu=floating-point-format
           Select which Floating Point architecture is the target.

       -mthumb
           Enable Thumb only instruction decoding.

       -mapcs-32 | -mapcs-26 | -mapcs-float | -mapcs-reentrant | -moabi
           Select which procedure calling convention is in use.

       -EB | -EL
           Select either big-endian (-EB) or little-endian (-EL) output.

       -mthumb-interwork
           Specify  that the code has been generated with interworking between
           Thumb and ARM code in mind.

       -k  Specify that PIC code has been generated.

       See the info pages for documentation of the CRIS-specific options.

       The following options are available when as is configured  for  a  D10V
       processor.

       -O  Optimize output by parallelizing instructions.

       The  following  options  are available when as is configured for a D30V
       processor.

       -O  Optimize output by parallelizing instructions.

       -n  Warn when nops are generated.

       -N  Warn when a nop after a 32-bit multiply instruction is generated.

       The following options are available when as is configured for the Intel
       80960 processor.

       -ACA | -ACA_A | -ACB | -ACC | -AKA | -AKB | -AKC | -AMC
           Specify which variant of the 960 architecture is the target.

       -b  Add code to collect statistics about branches taken.

       -no-relax
           Do  not  alter  compare-and-branch  instructions for long displace-
           ments; error if necessary.

       The following options are available when as is configured for the  Ubi-
       com IP2K series.

       -mip2022ext
           Specifies that the extended IP2022 instructions are allowed.

       -mip2022
           Restores  the  default  behaviour,  which  restricts  the permitted
           instructions to just the basic IP2022 ones.

       The following options are available when as is configured for the  Mit-
       subishi M32R series.

       --m32rx
           Specify  which  processor  in  the  M32R family is the target.  The
           default is normally the M32R, but this option  changes  it  to  the
           M32RX.

       --warn-explicit-parallel-conflicts or --Wp
           Produce  warning messages when questionable parallel constructs are
           encountered.

       --no-warn-explicit-parallel-conflicts or --Wnp
           Do not produce warning messages  when  questionable  parallel  con-
           structs are encountered.

       The  following  options  are  available  when  as is configured for the
       Motorola 68000 series.

       -l  Shorten references to undefined symbols, to  one  word  instead  of
           two.

       -m68000 | -m68008 | -m68010 | -m68020 | -m68030
       | -m68040 | -m68060 | -m68302 | -m68331 | -m68332
       | -m68333 | -m68340 | -mcpu32 | -m5200
           Specify  what  processor  in  the  68000 family is the target.  The
           default is normally the 68020, but this can be changed at  configu-
           ration time.

       -m68881 | -m68882 | -mno-68881 | -mno-68882
           The  target machine does (or does not) have a floating-point copro-
           cessor.  The default is to assume a coprocessor for  68020,  68030,
           and  cpu32.   Although  the  basic 68000 is not compatible with the
           68881, a combination of the two can be specified, since it's possi-
           ble  to  do emulation of the coprocessor instructions with the main
           processor.

       -m68851 | -mno-68851
           The target machine does (or does not) have a memory-management unit
           coprocessor.  The default is to assume an MMU for 68020 and up.

       For  details  about  the PDP-11 machine dependent features options, see
       @ref{PDP-11-Options}.

       -mpic | -mno-pic
           Generate position-independent (or  position-dependent)  code.   The
           default is -mpic.

       -mall
       -mall-extensions
           Enable all instruction set extensions.  This is the default.

       -mno-extensions
           Disable all instruction set extensions.

       -mextension | -mno-extension
           Enable (or disable) a particular instruction set extension.

       -mcpu
           Enable  the  instruction  set  extensions supported by a particular
           CPU, and disable all other extensions.

       -mmachine
           Enable the instruction set extensions  supported  by  a  particular
           machine model, and disable all other extensions.

       The  following  options are available when as is configured for a pico-
       Java processor.

       -mb Generate ``big endian'' format output.

       -ml Generate ``little endian'' format output.

       The following options are available  when  as  is  configured  for  the
       Motorola 68HC11 or 68HC12 series.

       -m68hc11 | -m68hc12 | -m68hcs12
           Specify  what  processor  is the target.  The default is defined by
           the configuration option when building the assembler.

       -mshort
           Specify to use the 16-bit integer ABI.

       -mlong
           Specify to use the 32-bit integer ABI.

       -mshort-double
           Specify to use the 32-bit double ABI.

       -mlong-double
           Specify to use the 64-bit double ABI.

       --force-long-branchs
           Relative branches are turned into absolute ones. This concerns con-
           ditional  branches,  unconditional  branches  and branches to a sub
           routine.

       -S | --short-branchs
           Do not turn relative branchs into absolute ones when the offset  is
           out of range.

       --strict-direct-mode
           Do  not  turn  the  direct addressing mode into extended addressing
           mode when the instruction does not support direct addressing  mode.

       --print-insn-syntax
           Print the syntax of instruction in case of error.

       --print-opcodes
           print the list of instructions with syntax and then exit.

       --generate-example
           print  an  example of instruction for each possible instruction and
           then exit.  This option is only useful for testing as.

       The following options are available when as is configured for the SPARC
       architecture:

       -Av6 | -Av7 | -Av8 | -Asparclet | -Asparclite
       -Av8plus | -Av8plusa | -Av9 | -Av9a
           Explicitly select a variant of the SPARC architecture.

           -Av8plus and -Av8plusa select a 32 bit environment.  -Av9 and -Av9a
           select a 64 bit environment.

           -Av8plusa and -Av9a enable the SPARC V9 instruction set with Ultra-
           SPARC extensions.

       -xarch=v8plus | -xarch=v8plusa
           For compatibility with the Solaris v9 assembler.  These options are
           equivalent to -Av8plus and -Av8plusa, respectively.

       -bump
           Warn when the assembler switches to another architecture.

       The following options are available when as is configured  for  a  MIPS
       processor.

       -G num
           This  option  sets the largest size of an object that can be refer-
           enced implicitly with the "gp" register.  It is only  accepted  for
           targets that use ECOFF format, such as a DECstation running Ultrix.
           The default value is 8.

       -EB Generate ``big endian'' format output.

       -EL Generate ``little endian'' format output.

       -mips1
       -mips2
       -mips3
       -mips4
       -mips5
       -mips32
       -mips32r2
       -mips64
           Generate code for a particular MIPS  Instruction  Set  Architecture
           level.  -mips1 is an alias for -march=r3000, -mips2 is an alias for
           -march=r6000, -mips3 is an alias for -march=r4000 and -mips4 is  an
           alias  for  -march=r8000.   -mips5, -mips32, -mips32r2, and -mips64
           correspond to generic MIPS V, MIPS32, MIPS32 Release 2, and  MIPS64
           ISA processors, respectively.

       -march=CPU
           Generate code for a particular MIPS cpu.

       -mtune=cpu
           Schedule and tune for a particular MIPS cpu.

       -mfix7000
       -mno-fix7000
           Cause  nops  to be inserted if the read of the destination register
           of an mfhi or mflo instruction occurs in the following two instruc-
           tions.

       -mdebug
       -no-mdebug
           Cause  stabs-style debugging output to go into an ECOFF-style .mde-
           bug section instead of the standard ELF .stabs sections.

       -mgp32
       -mfp32
           The register sizes are normally inferred from the ISA and ABI,  but
           these  flags force a certain group of registers to be treated as 32
           bits wide at all times.  -mgp32 controls the size  of  general-pur-
           pose  registers and -mfp32 controls the size of floating-point reg-
           isters.

       -mips16
       -no-mips16
           Generate code for the MIPS 16 processor.   This  is  equivalent  to
           putting   ".set   mips16"  at  the  start  of  the  assembly  file.
           -no-mips16 turns off this option.

       -mips3d
       -no-mips3d
           Generate code for the MIPS-3D Application Specific Extension.  This
           tells  the  assembler  to  accept MIPS-3D instructions.  -no-mips3d
           turns off this option.

       -mdmx
       -no-mdmx
           Generate code for the MDMX Application  Specific  Extension.   This
           tells  the  assembler  to accept MDMX instructions.  -no-mdmx turns
           off this option.

       --construct-floats
       --no-construct-floats
           The --no-construct-floats option disables the construction of  dou-
           ble width floating point constants by loading the two halves of the
           value into the two single width floating point registers that  make
           up  the  double  width  register.  By default --construct-floats is
           selected, allowing construction of these floating point  constants.

       --emulation=name
           This  option causes as to emulate as configured for some other tar-
           get, in all respects, including output format (choosing between ELF
           and  ECOFF  only),  handling  of  pseudo-opcodes which may generate
           debugging  information  or  store  symbol  table  information,  and
           default endianness.  The available configuration names are: mipsec-
           off, mipself,  mipslecoff,  mipsbecoff,  mipslelf,  mipsbelf.   The
           first two do not alter the default endianness from that of the pri-
           mary target for which the  assembler  was  configured;  the  others
           change  the  default to little- or big-endian as indicated by the b
           or l in the name.  Using -EB or -EL will  override  the  endianness
           selection in any case.

           This  option is currently supported only when the primary target as
           is configured for is a MIPS ELF or ECOFF target.  Furthermore,  the
           primary  target  or  others  specified with --enable-targets=... at
           configuration time must include support for the  other  format,  if
           both  are  to  be available.  For example, the Irix 5 configuration
           includes support for both.

           Eventually, this option will support more configurations, with more
           fine-grained  control  over  the  assembler's behavior, and will be
           supported for more processors.

       -nocpp
           as ignores this option.  It is accepted for compatibility with  the
           native tools.

       --trap
       --no-trap
       --break
       --no-break
           Control  how  to  deal with multiplication overflow and division by
           zero.  --trap or --no-break (which are synonyms) take a trap excep-
           tion  (and  only  work for Instruction Set Architecture level 2 and
           higher); --break or --no-trap (also synonyms, and the default) take
           a break exception.

       -n  When  this  option  is  used, as will issue a warning every time it
           generates a nop instruction from a macro.

       The following options are available when as is configured for an  MCore
       processor.

       -jsri2bsr
       -nojsri2bsr
           Enable  or disable the JSRI to BSR transformation.  By default this
           is enabled.  The command line option -nojsri2bsr  can  be  used  to
           disable it.

       -sifilter
       -nosifilter
           Enable or disable the silicon filter behaviour.  By default this is
           disabled.  The default can be overridden by the  -sifilter  command
           line option.

       -relax
           Alter jump instructions for long displacements.

       -mcpu=[210|340]
           Select  the  cpu  type on the target hardware.  This controls which
           instructions can be assembled.

       -EB Assemble for a big endian target.

       -EL Assemble for a little endian target.

       See the info pages for documentation of the MMIX-specific options.

SEE ALSO
       gcc(1), ld(1), and the Info entries for binutils and ld.

COPYRIGHT
       Copyright (C) 1991, 92, 93, 94, 95, 96, 97, 98, 99,  2000,  2001,  2002
       Free Software Foundation, Inc.

       Permission  is  granted to copy, distribute and/or modify this document
       under the terms of the GNU Free Documentation License, Version  1.1  or
       any  later  version  published by the Free Software Foundation; with no
       Invariant Sections, with no Front-Cover Texts, and with  no  Back-Cover
       Texts.   A copy of the license is included in the section entitled "GNU
       Free Documentation License".



binutils-2.13.90.0.18             2003-02-24                             AS(1)