serial_cs

SERIAL_CS(4)                                                      SERIAL_CS(4)



NAME
       serial_cs - PCMCIA serial port driver

SYNOPSIS
       insmod serial_cs.o [pc_debug=n] [irq_list=i,j,...]  [do_sound=n]

DESCRIPTION
       Serial_cs  is  the  Card Services driver for all PCMCIA serial devices,
       including modem cards.  When serial_cs is bound to a  serial  or  modem
       card,  it  will  generally  attempt to allocate the first unused serial
       device for use by the card.  The device chosen will be recorded in  the
       kernel  log  file,  and will also be reported to cardmgr(8).  The major
       and minor numbers and device name reported by serial_cs will match  the
       corresponding  "dialout"  device  (/dev/cua#).   The  new device can be
       accessed using this device file or the corresponding /dev/ttyS# device.
       The  default  serial  card setup script will link the dialout device to
       /dev/modem.

PARAMETERS
       pc_debug=n
              Selects the PCMCIA debugging  level.   This  parameter  is  only
              available  if  the module is compiled with debugging enabled.  A
              non-zero value enables debugging.

       irq_list=i,j,...
              Specifies the set of interrupts that may be  allocated  by  this
              driver.

       do_sound=n
              A  flag  specifying  if  speaker  output should be enabled.  The
              default is 1 (true).  Set to 0 to disable speaker output.

AUTHOR
       David Hinds - dahinds@users.sourceforge.net

SEE ALSO
       cardmgr(8), pcmcia(5).



pcmcia-cs                     2000/06/12 21:24:48                 SERIAL_CS(4)